Fan air ceramic

Data-sheet

Nozzle Index

These nozzles draw in air to provide large aerated droplets which can shatter upon target impact and disperse rather than bounce, as with traditional large droplets, to provide improved coverage and penetration with reduced drift.
The Fan Air Ceramic induction nozzles has proved very popular world wide for many years. The pre-orifice insert is removable to facilitate cleaning and the air holes are shrouded to reduce potential blocking in dusty applications.
With the Fan Air Ceramic induction nozzle, the addition of a side hole draws in air to infuse the fluid stream which provides yet a further enhancement to the low drift characteristics ideal for sensitive spraying applications.
This nozzle is used for application of herbicides, fungicides, insecticides and is ideally suited to machines using automatic rate controllers since the spray angle will always be maintained as the flow rate is adjusted up and down. 

blister pack

AFC colorati

 

Features

  • Available in spray angle of 110°.
  • Full coverage maintained over a wide pressure range.
  • Two piece construction providing a removable insert to facilitate cleaning.
  • All ceramic construction for chemical stability and excellent wear characteristics.
  • Only 26.5 mm in length, therefore less prone to damage.
  • Colour coded (in accordance with ISO10625) for quick identification of flow rate.
  • International size allows direct replacement with all conventional flat fan tips.
  • Precision moulded with a polyacetal outer body and a ceramic insert for excellent wear.
  • Self alignment of spray when fitted in standard flat fan bayonet caps.
  • Suitable for both knapsack and boom sprayers.
  • Potential drift reduction of 79%-96% at 3 bar when compared with conventional nozzles.


Spray angle and coverage. Boom spacing.
Single nozzle distribution. Boom distribution.

Code

l/ha (nozzle spacing: 50 cm )
4 Km/h 6 Km/h 8 Km/h 10 Km/h 12 Km/h 14 Km/h 16 Km/h 18 Km/h
AFC110015
2
0.49
147
98
74
59
49
42
37
33
3
0.60
180
120
90
72
60
51
45
40
4
0.69
207
138
104
83
69
59
52
46
5
0.77
231
154
116
92
77
66
58
51
AFC11002
2
0.65
195
130
98
78
65
56
49
43
3
0.80
240
160
120
96
80
69
60
53
4
0.92
276
184
138
110
92
79
69
61
5
1.03
309
206
155
124
103
88
77
69
AFC110025
2
0.82
246
164
123
98
82
70
62
55
3
1.00
300
200
150
120
100
86
75
67
4
1.15
345
230
173
138
115
99
86
77
5
1.29
387
258
194
155
129
111
97
86
AFC11003
2
0.98
294
196
147
118
98
84
74
65
3
1.20
360
240
180
144
120
103
90
80
4
1.39
417
278
209
167
139
119
104
93
5
1.55
465
310
233
186
155
133
116
103
AFC11004
2
1.31
393
262
197
157
131
112
98
87
3
1.60
480
320
240
192
160
137
120
107
4
1.85
555
370
278
222
185
159
139
123
5
2.07
621
414
311
248
207
177
155
138
AFC11005
2
1.63
489
326
244
196
163
140
122
109
3
2.00
600
400
300
240
200
171
150
133
4
2.31
693
462
346
277
231
198
173
154
5
2.58
774
516
387
310
258
221
193
172


Code Quantity per pack
AFC110015B1 10 nozzles
AFC11002B1
AFC110025B1
AFC11003B1
AFC11004B1
AFC11005B1